Choose the narrower rolling shelf if your salon needs a compact home for clean towel bins; choose the wider model only when larger bundles justify its footprint. For a back-room reset this fall, start with your busiest towel-restocking cycle, then check bin fit, travel clearance, and the wheel configuration’s total capacity.
Size the shelf around one towel-restocking cycle
For a small hair salon, the useful question is not how many towels you own. It is how many clean, dry towels must be available between laundry deliveries or wash cycles. A shelf that holds that working supply can support restocking without turning the shampoo area into overflow storage.
Fold towels the way staff actually store them, then pack a representative covered bin. Measure its outside edges, including handles and the space needed to remove its lid. Covered containers help keep loose hair and splashes away from clean towels; open shelving alone does not provide that protection.
- Count the working supply: Include a reasonable buffer for your own appointment schedule, rather than sizing around an unusually quiet day.
- Keep clean and used towels separate: Plan this shelf for clean stock, with a separate collection point for used towels.
- Plan access: Staff should be able to remove one bin without first unloading another.
Explore the products
Compare width without assuming more weight capacity
These two black HOMEDANT HOUSE rolling models offer different overall dimensions but the same total load rating in their verified Wheel Large configurations. Dimensions below are width × depth × height in inches.
| US model | Overall dimensions | Wheel total capacity | Best fit to consider |
|---|---|---|---|
| HS904016.5W-5B | 36.2 × 16.5 × 69.5 inches | 308 lb | A smaller back-room parking space |
| HS124518W-5B | 48.1 × 18.5 × 75.4 inches | 308 lb | Bulkier towel bundles, if bins fit |
The 36.2-inch black rolling shelf is the better starting point when floor space is tight. Its narrower, shallower footprint takes less room beside your laundry pickup or folding area. It suits a workflow where staff replenish smaller towel bins more often.
Consider the 48.1-inch black rolling shelf when your working supply needs more space across each level. The tradeoff is a wider, deeper, taller unit to park and maneuver. Its larger size does not increase the 308 lb wheel total capacity.
Do not treat overall width and depth as guaranteed usable bin clearance. Check the intended container layout and shelf opening before committing to a full set of bins. The wheel total is a whole-unit limit, not a per-shelf allowance; do not substitute a standing-configuration rating.
Check the route as carefully as the parking spot
If staff will move the unit for towel restocking, measure the entire route between its storage position and the replenishment point. Check door openings, turns, overhead obstructions, and the space staff need to stand while handling bins. A shelf can fit against a wall yet be awkward to turn out of that position.
Keep customer paths and exits clear. Store heavier bins lower, distribute the load, and prevent containers from overhanging or shifting. Follow the product’s movement and loading instructions rather than assuming a total capacity guarantees safe travel over thresholds or uneven floors. If the route is unsuitable, leave the shelf parked and carry individual towel bins to the stations.
